Apart from the flexibility and aesthetics of tile floors, these are advantageous to use due to its low maintenance requirement. By configuration, there are glazed tile floors that can protect itself from chemicals, dirt, stains, and water all at the same time.
At present, you can expect more resistant tile floors. Although easy to maintain, it is still imperative to learn the best way to clean tile floors. There are many options around, but the choice will depend on the type of your tiles and available resources in your place.
What You Need to Prepare Before Tile Cleaning
The materials you may need to clean your tile flooring depend on the method you chose. Nonetheless, by and large, you will likely require any of the following materials:
- Vacuum. You may need this equipment to get rid of the dust, dirt, and tangible materials present on your tile floor. It is a device that utilizes an air pump to suck up the given elements from your floor.
- Broom. This is an alternative to vacuum, which is also effective in preparing the floor before water-based cleaning. Simply avoid using an abrasive broom to keep the tiles from scratches.
- Mop. This is a tool that has a handle with a sponge or loose strings. You can use this to clean tile floors after wiping off dirt.
- Detergent. The formulation of this material may vary depending on the brand. There are powders intended for tile floor cleaning.
- Absorbent Cloths. You need this to dry the floor after cleaning it with water-based mixtures.
Learn Most Ideal Way of Cleaning Tile Floor
If you clean your tile floor, you should follow the standard measures in doing so. To begin the maintenance of your flooring, here are the steps to follow:
1) Wear protective gloves.
It is best to wear protective gloves before carrying out the cleaning task. Some products may be harsh on the skin. It is also not advisable to let dirt be in contact with your skin for a long time.
Commercial formulations often contain harsh bleach, especially if you are working on stubborn stains. Nonetheless, even if you are using a mild solution, it is still a good idea to wear gloves for irritation’s prevention.
2) Vacuum the tile floor
This must be done before anything else. Get rid of the debris, dirt, and other stains before wetting the floor. If you do not get rid of these elements, these may embed in your tile, leading to a more serious problem in the future.
Alternatively, you may use a broom. This will prepare the tile floor considerably. However, a vacuum is often advised for it could eliminate even the smallest dirt on the surface.
3) Carry out concentrated cleaning for stains
There is a possibility that after vacuuming the floor, stains may still sit on its surface. You should create a separate paste for it. A formulation of warm water and scouring powder’s equal parts is effective.
You can use a cleaning cloth to rub the solution onto the tile floor. Let it sit for up 10 minutes. Afterwards, you use a soft brush to eliminate the paste and stain’s remains altogether.
In case you have encountered rust, you should use kerosene. Dampen a clean cloth with the remover. Rub it on the rust until it gets removed.
4) Mop or wipe the floor
You should mix cleaning detergent and hot water beforehand. Then, soak the mop. Wipe the floor using the tool to remove the remaining dirt on its surface.
If you can use formulations with added enhancements for tile’s color, gloss, or shine, you should do so. There are others who prefer to use cloths to wipe the floor. The procedure is also the same. Prepare the cleaning mixture first.
Soak the cloth and wipe the tiles until clean. In case you have pets or children, you should use chemical-free detergent. Vinegar is one option that can help.
It will not only clean but also eliminate the unwanted odor of your floor. Otherwise, you may use baking soda, which has long been trusted in removing grout stains. The difference is, you have to let it sit overnight prior to scrubbing the next day.
Another option is the combination of water and hydrogen peroxide. Applying it onto the grout using a toothbrush will do the work.
5) Dry the floor
This must be done right after getting rid of the stain, dirt, and debris from the tile floor. If you left the floor wet, you will only encourage new dirt from developing into a new blot. You could use a dry mop to run over the floor.
Alternatively, an absorbent cloth may also be used. Simply ensure that it is clean and totally dry to absorb water more effectively.
Have you enjoyed the tutorial? It is important to keep your floor clean to avoid the spread of dirt, bacteria, and viruses in your house. Regular cleaning must also be done, especially if you have pets and kids who often play on the floor.
When buying a detergent to use for tile maintenance, always ensure that it works for the type of floor you have. In the case of spills, make it a habit to clean it instantly to prevent permanent staining.
Let us know what you think about the article by dropping a comment. Else, share this to your peers if you found the article helpful.